TNS2

Siemens Micromaster 4 drive systems

o EMT-SYSTEMS

ŚCIEŻKA
SZKOLENIOWA

Objectives:

Acquiring knowledge and skills regarding Siemens Micromaster 4 drives
Familiarizing diagnostic and selection methods of systems featuring Micromaster 4 frequency converter and electric motor
Gaining knowledge on the diagnostic analysis and maintenance of Micromaster 4 electrical drives

Course type

Open training

Course level

TNS2

Duration

4 days

Prerequisites

Basic knowledge in the field of electrical engineering, computer skills, completed PLC Siemens S7-300 basic training course or knowledge equivalent to the PLC Siemens S7-300 basic training course

Location

Laboratory of Electric Drives in the Engineering Training Centre in Gliwice or the client company
See the laboratory

Dates

Rok 2025

Schedule

day 1 h. 8.00 - 16.00
day 2 h. 8.00 - 16.00
day 3 h. 8.00 - 16.00
day 4 h. 8.00 - 16.00

Price

Highlights

Individual workstations
Extra free training hours for practice
A certificate of completion
Educational aids: scripts
Access to specialist magazines and technical literature (regarding stationary training)
Writing aids (pen, notebook) - regarding stationary training
Complete care of idividually assigned customer service person
Participant Cards with discounts to partner restaurants / pubs in Gliwice (regarding stationary training)

Catering

Participants of training courses at our center receive unlimited access to the Cechownia Cafe coffee bar and a two-course lunch.
More information

Contact

tel.: 0048 32 4111 000
e-mail: info@emt-systems.pl

Closed trainings

This course is also available as a closed training where the dates, price, locations and the content is settled individually with the Client.

Certificate

After completing the training, each participant receives a personalized bilingual certificate that descriptively confirms the acquired skills in accordance with the PN-EN ISO 9001:2015 quality management system implemented at EMT-SYSTEMS Sp. z o.o., supervised and certified by TUV Nord Polska.
More information

Accommodation

List of hotels near the training location

Please contact us on:

0048 32 4111 000

info@emt-systems.pl

should you have any questions on the course you have chosen

Course program

Fundamentals of frequency converters:
- overview of the Micromaster converters
- phased-out products
- configuration software
Electrical properties of drive systems:
- operation of AC motors
- ways of connecting engines
- motor nameplate
- converter-based motor drive
The first configuration of a drive system:
- connecting the converter using RS232 / RS485
- online drive configuration
- basic functions of Starter software
- setup without connecting the driver – offline
Drive system diagnostics:
- current information about the drive operation
- historic information from the error buffer
- diagnostic information about operation of the drive
- test launch of a drive system
- access to helps and documentation
- types of errors
- parameter table - Expert List
- preview digital and analog I / O signals
- parameter tables – VAT tables on the drive side
Setting up a project for PLC:
- PLC project configuration
- basic information on creating applications for the controller used to control the drive
Different methods of connection with a drive system for the configuration purposes:
- connecting the inverter using RS485 / RS232
- connecting the inverter using Ethernet / Profibus DP routing
- connecting the inverter via Profibus DP
Basic drive system control via Profibus DP:
- communication frame structure
- creating the FB function controlling the drive from Profibus DP
Advanced drive system control via Profibus DP:
- creating the Profibus DP-operated drive control function
- management of PLC errors connected with operation of the Profibus DP network
- editing drive parameters from the application on the PLC side
Other methods of drive system control:
- starting/shutting down the drive via digital inputs
- setting binary rotational speed by means of digital inputs
- speed setting by means of analog inputs
- speed setting by means of monostable buttons – so called MOP
- using digital and analog outputs
Different drive data sets – CDS/DDS:
- different command data sets - CDS
- different drive data sets - DDS
- configuration of a drive system with two data sets (one for the local controller and the other for the remote controller)
- BICO technology (Binector Connector Technology)
Free modules:
- records of logical functions performed in the drive system
- drive as an independent element of the control system
Local operation panels:
- using BOP and AOP for configuration and diagnostics of drive systems
- inverter parameter backup performed by means of the panel
Functions enhancing the capabilities of drive systems:
- different methods of drive system control - U/f control, vector control with/without encoder
- different methods of engine braking - dynamic braking, combined braking, mechanical braking
- speed trace function, kinetic buffering
- shaping motor’s operating characteristics
- embedded PID controller

Laboratory

Participants have at their disposal individual training positions designed to learn the tasks and industrial solutions based on the electrical drives using frequency converters. Each position is fitted with a Siemens Micromaster 440 frequency converter featuring digital and analog signal simulator. Each converter is connected to the asynchronous electric motor.

Workstations features:

Siemens Micromaster 440

6 digital inputs
3 digital outputs
2 analog inputs
2 analog outputs
Communication interface: PROFIBUS

Parameters of Siemens electric motor systems:

Power supply: 50 Hz, 230/400 V
Power: 0,12 kW
RPM 1350/min
Electric current: 0,73/0,42 A

View photos of our Laboratory of Industrial Automation Systems

Our equipment allows the participants to perform tasks based on the actual elements applied in industrial automation.

Software

STARTER – an easy to use configuration, commissioning and monitoring tool with graphical interface for the Siemens frequency converters.

About us

Awards References ON-LINE trainings info

Our experts

M.SC. Andrzej Kasprzycki

Expert in automation with over 20 years of experience supported by implementations M.SC. Andrzej Kasprzycki of complex industrial automation systems and maintenance of large production lines including the first PCS7 installation in Poland. He is a graduate from the faculty of Automatic Control, Electronics and Computer Science of the Silesian University of Technology.

His professional career is primarily focused on PLC and SCADA programming; he has completed numerous complex projects and contributed to the modernization of many automation systems. He has worked as a teacher for over 10 years and has successfully trained many young engineers. Students see him as a passionate and active tutor with extensive professional knowledge.

He specializes in SIEMENS products and systems such as: SINAMIC s7 300/400, SIMATIC STEP 7, TIA PORTAL, PROTOOL, PCS7, WINCC FLEXIBLE, WINCC, WINCC PROFESSIONAL, MICROMASTER and SINAMICS S,G drives. He is the author of many excellent documentations and course programs and the courses tutored by him are particularly valued by the participants

Materiały szkoleniowe

Participants of the course Siemens Micromaster 4 drive systems receive a textbook covering all the topics and problems discussed during the course. Additionally, they have access to technical documentation (DTR) of the devices used during the course.

Benefits for participants

By the end of the course participants will be able to:

Describe the design of electric motors
Describe the design and functions of Micromaster 4 frequency converters
Parameterize and launch Micromaster 4 drives
Use operation modes and methods of controlling Micromaster 4 drives

Intended for:

Maintenance services
Implementation staff
Anyone interested in modern drive systems

Catering

In addition to the substantive aspect, the comfort of our training participants is very important to us. We provide students with a climatic cafe and restaurant space, which is a place for refreshments and relaxation during breaks. We invite you to use the coffee bar and the modern massage chair!

During each training day, participants receive:

Unlimited access to the Cechownia Cafe coffee bar, serving tea and high-quality freshly ground coffee. The bar is equipped with:
- NECTO Karisma - a professional espresso machine of Italian production.
- THERMOPLAN BW 4 - a professional espresso machine made in Switzerland.
These are coffee machines used in the best coffee shops. According to your taste, we serve unique types of coffee - Cappuccino, Espresso, Americano, Caffe Latte and Turkish coffee. Training participants can also use unlimited sparkling and still water, juices and sweets.

Two-course dinner - a combination of traditional, home-made flavors with meals served in restaurants.

Until 4:00 PM in the cafe on the first floor you can also buy fresh sandwiches, cakes, sweet and salty snacks and cold drinks. After training - from 4:00 PM - we invite you to try the delicious dishes of the Cechownia Restaurant, prepared by the best chefs in Gliwice.