Looking for training? Have questions?
Tel: 32 4111 000
CNC Department: 515 485 139
S7-300/400
Specialized trainings
MITSUBISHI 
H2
Hydraulic drives and control systems in machines
and devices
Equipment we use:
Having completed the course, participants:
- Know the differences between throttle and volume controlled systems
- Have the knowledge in the area of conventional systems of control and regulation of the hydralic actuators
- Are familiar with the design, operation and methods of setting adjustable units regulators (of pumps and motors)
- Have the knowledge regarding methods of synchronizing the receivers motion and sequential controlled systems
- Are familiar with the design, configurations and operating principle of logic elements used in hydrostatic systems
- Have the skills of experimental examination of hydraulic elements and systems
- Know the principles regarding maintenance and repair of hydraulic elements and devices
Course type
Open training
Course level
H2
Duration
3 days
Prerequisites
General technical knowledge. Accomplishment of H1 or skills on similar level.
Location
Laboratory of Hydraulic Drives and Control Systems Engineering Training Center in Gliwice, Poland
See the laboratory
See the laboratory
Dates
Rok 2026
Dates
Please contact us
Schedule
day 1 h. 9.00 - 16.00
day 2 h. 9.00 - 16.00
day 3 h. 9.00 - 16.00
day 2 h. 9.00 - 16.00
day 3 h. 9.00 - 16.00
Price
Highlights
- Certyfikat ukończenia kursu w 2 językach – polskim i angielskim
- Educational aids: scripts
- Dostęp do fachowej literatury i czasopism branżowych (dot. szkoleń stacjonarnych)
- Materiały piśmiennicze np. notatnik, długopis (dot. szkoleń stacjonarnych)
- Kompleksową pomoc indywidualnie przydzielonych opiekunów kursu
- Karty Kursantów upoważniające do zniżek w wybranych gliwickich lokalach partnerskich (dot. szkoleń stacjonarnych)
Catering
Participants of training courses at our center receive unlimited access to the Cechownia Cafe coffee bar and a two-course lunch.
More information
More information
Contact
Closed trainings
This course is also available as a closed training where the dates, price, locations and the content is settled individually with the Client.
Certificate
After completing the training, each participant receives a personalized bilingual certificate that descriptively confirms the acquired skills in accordance with the PN-EN ISO 9001:2015 quality management system implemented at EMT-SYSTEMS Sp. z o.o., supervised and certified by TUV Nord Polska.
More information
More information
Accommodation
List of hotels near the training location
Please contact us on:
0048 32 4111 000
info@emt-systems.pl
should you have any questions on the course you have chosen
Course program
|
|
|
|
|
Laboratory
Training rooms and laboratories are air-conditioned, large and spacious. Working positions for students are expertly equipped. Each participant has access to the computer stations with simulation software, the latest product directories, sections of hydraulic components and professionally equipped laboratories used for practical exercises.
Our training rooms allow working on the industrial components and power hydraulic systems of the most popular manufacturers - PARKER Hannifin, BOSCH Rexroth, Manuli Fluiconnecto, HYDAC and PONAR WADOWICE..
For practical exercises we use diverse workstations. Depending on the degree of the course, we offer our students the following equipment:
Conventional hydraulics
The workstations have a unique and Poland’s only design enabling exercises on different levels of advancement:
- assembly and testing the operation of freely configured conventionally or electrically controlled hydraulic systems
- conducting field tests of typical hydraulic components (pumps, pressure valves of the designed hydraulic systems)
- simple, convenient and quick installation of the designed hydraulic systems
- testing the operation and observing the operation of a power system, pressure valves, directional and flow rate control valves and actuators
- acquiring skills in the field of design and installation of the electro-hydraulic systems of electric and proportional relay control
The workstations of electrohydraulics and proportional hydraulics
The workstations have a unique and Poland’s only design enabling exercises on different levels of advancement:
- assembly and testing the operation of freely configured hydraulic systems, proportionally controlled in open or closed circuits
- acquiring skills in the field of design and installation of the electrohydraulic systems of electric and proportional relay control
- parameterization of proportional systems
The workstations of visualization and regulation of hydraulics system operation
The bench for practical exercises presents the classic operation of the hydraulic system. By using components made of PMMA, clearly visible are the channels, flows and the interior of each component used in the system while it is running.
The bench is controlled by the automation system with visualization on the operator panel. The system is used to present to the participants the operation of the hydraulic systems, their strengths, weaknesses and the most failure-prone spots with methods of quick troubleshooting. Components of the system:
- valve block
- actuator
- hydraulic accumulator
- working medium tank
- control panel with operator panel.
Advanced stations of mobile hydraulic drives
The station of mobile hydraulic drives and mobile control systems in proportional technology – Iqan control system – Parker Hannifin.
The station of mobile drives with Load Sensing System
The station of mobile hydraulic drives equipped with drive system featuring a variable displacement pump and the Load Sensing control system (LS).
Unique teaching aids
During our courses, we also use unique teaching elements and components:
- tailor-made sections of all hydraulic system components
- we disassemble the components in order to show the classic failure consequences
Specialist tools
Participants learn and perform a series of exercises using professional industrial tools and measuring equipment. At your disposal:
- Parker Service Master Plus analyzer used to measure i.a.: flow, temperature and pressure of the working medium
- HYDAC HMG 3010 analyzer used to measure i.a.: flow, temperature and pressure of the working medium
- A device filling the circuit with the working medium
- A working medium quality analyzer
- Many others
Software
The teaching process is being supported by Fluid-SIM H. The software helps to learn the principles of the design and simulation of hydraulic and electrohydraulic control systems. The software enables analyzing the increase of the level and rate of the flow, pressure drops in the valves as well as designating the velocity and accelerations of the cylinder’s pistons.
About us
Our experts
Our trainers have extensive theoretical and practical technical knowledge and are respected practitioners with years of documented work experience and many completed implementation and repair projects. In addition, they provide consulting services and work as experts in drive and control systems for the renowned national trade periodicals. During trainings, their main focus is on passing the knowledge of the real examples they have encountered in their professional work.
Our trainers are open to all suggestions made by the participants. It is very common that during trainings the group discusses the issues beyond the scope of the standard program that cover specific aspects of the students work.
Completed courses also lead to cooperation between EMT Systems Ltd. and representatives of industrial facilities in the following areas: projects, modernization and commissioning of the machine hydraulic systems and technological lines.
Materiały szkoleniowe
Each participant of our courses receive a course book compiled by the Engineering Training Center EMT-Systems and comprising the topics included in the course content.
We guarantee:
- perfect training conditions in the professionally equipped Laboratory of hydraulic drives and control systems,
- a large number of practical exercises to facilitate the acquisition of specific skills,
- a wide range of teaching aidspomocy dydaktycznych that help strengthen the acquired knowledge,
- a professional staff of trainers with many years of practical and theoretical experience.
Safety clothing
We provide participants with safety clothing they need for practical exercises on machines. Participants receive:
- Protective overalls
- Glasses
- Disposable gloves
- Safety clothing
Closed training
Apart from the open courses organized in our offices, we also offer a selection of courses in power hydraulics organized at our clients’ premises. These trainings are characterized by:
- a training scheme based on the individually chosen topics and tailored course materials
- in-depth analysis of the hydraulic diagrams provided by the client
- practical exercises on the industrial components
- exercises with the machines and systems from client’s production hall
We have our own car fleet and mobile units for basic exercises and unassisted assembly of the systems. Their sophisticated design and specially arranged functionality enable the realization of atop quality training outside the EMT-Systems laboratory of power hydraulics.
After the training the participant will be able to:
- describe the design and perform different tasks regarding hydraulic systems,
- construct systems featuring single- and double-acting cylinders,
- connect the actuators in series or in parallel or in series-parallel configurations,
- assembly throttle and volume control systems,
- synchronize the movement of cylinders,
- measure the hydraulic quantities and analyze the results,
- design and control hydraulic systems with logic elements,
- make periodic technical inspections and repairs of hydraulic systems and devices
Catering
The essential elements of the training courses organized by EMT-Systems are content, well-qualified trainers and modern equipment. However, as the Engineering Training Center we also pay attention to the highest quality of catering services.
Each day of the course the participants receive:-
- Unlimited access to our EMT Coffi Di‘Italian Espresso Bar. During short breaks in classes our students may use the fully stocked coffee bar:
- NECTO Karisma – a professional Italian coffee machine used in best cafes. You may choose the coffee you like best - Cappuccino, Espresso, Americano, Caffe Latte and Turkish Coffee.
- Traditional vending machine serving different types of coffees and hot beverages such as tea, hot chocolate or borscht.
- A selection of kettles, coffees and teas for self service.
- Sparkling and still mineral water, squash.
- A selection of cookies and fruit.
- Unlimited access to our EMT Coffi Di‘Italian Espresso Bar. During short breaks in classes our students may use the fully stocked coffee bar:
- A two-course lunch – the cuisine offered by two nearby diners is a combination of traditional, home-made flavors known from modern dairy bars with meals served in restaurants.
Catalogues
