TIA-UNI1
WinCC Unified in the TIA Portal – Level 1
After completing the training, the participant:
- Can independently configure the PLC with the WinCC Comfort Unified panel
- Knows the possibilities of the new WinCC Unified panels
- Has developed skills to create screens using basic and advanced visualization components
Course type
Open training
Course level
TIA-UNI1
Duration
5 days, 35 hours
Prerequisites
General technical knowledge, very good computer skills in MS - Windows. Preferred completion of TIA1200-1: Programming Siemens SIMATIC S7-1200 in TIA Portal - Level 1 or TIA1500-1: Programming Siemens SIMATIC S7-1500 in TIA Portal - Level 1 or skills at this level.
Location
Laboratory in the Engineering Training Center in Gliwice or the client company
See the laboratory
See the laboratory
Dates
Terms, costs of participation, location and training program are being set individually with the customer
Schedule
day 1, h. 10.00 - 16.00
day 2, h. 8.00 - 16.00
day 3, h. 8.00 - 16.00
day 4, h. 8.00 - 16.00
day 5, h. 8.00 - 13.00
day 2, h. 8.00 - 16.00
day 3, h. 8.00 - 16.00
day 4, h. 8.00 - 16.00
day 5, h. 8.00 - 13.00
Price
4000 PLN (netto) + 23% VAT
Highlights
- A certificate of completion
- Educational aids: scripts
- Access to specialist magazines and technical literature (regarding stationary training)
- Writing aids (pen, notebook) - regarding stationary training
- Complete care of idividually assigned customer service person
- Participant Cards with discounts to partner restaurants / pubs in Gliwice (regarding stationary training)
Catering
Participants of training courses at our center receive unlimited access to the Cechownia Cafe coffee bar and a two-course lunch.
More information
More information
Contact
Closed trainings
This course is also available as a closed training where the dates, price, locations and the content is settled individually with the Client.
Certificate
After completing the training, each participant receives a personalized bilingual certificate that descriptively confirms the acquired skills in accordance with the PN-EN ISO 9001:2015 quality management system implemented at EMT-SYSTEMS Sp. z o.o., supervised and certified by TUV Nord Polska.
More information
More information
Accommodation
List of hotels near the training location
Please contact us on:
0048 32 4111 000
info@emt-systems.pl
should you have any questions on the course you have chosen
Course program
- WinCC Unified – introduction
- HMI – Control Panel
- HMI panel – new project, configuration
- Remote access to the HMI panel
- S7-1500 configuration
- WinCC Editor - basic information
- HMI Variables, Elements section
- Display formats, support for status variables
- Text and graphic lists
- Expressions - dynamization with logical expressions
- Screen management
- PLC-HMI real-time clock synchronization
- Scheduled tasks – cyclical and event-based tasks
- Creating scripts in JavaScript
- Users and access levels
- Multilingual application
- Alerting
- Logging process and alarm data
- Trend control - charts
- Recipes - Parameter Set Types
- Backup
Laboratory
Training rooms and laboratories - air-conditioned, large and spacious. Workstations for trainees have been specially equipped. Each participant of the training has at his or her disposal an individual workstation for learning and solving industrial tasks based on the use of Siemens SIMATIC S7-1200 controller, TIA Portal software and WinCC Unified operator panel simulator. Due to interrupted supply chains, we cannot guarantee the presence of a physical device in the training. The use of the simulator allows you to fully implement solutions standard for panels, such as advanced controls, charts, faceplates, and also enables data logging and recipe handling or gesture control. In other words, with the WinCC Unified software, it is possible to implement all training topics based on a simulation environment without any reduction in training quality.
SIEMENS S7-1200 controller:
SIEMENS TIA Portal V17 is the next version of the integrated design environment that supports solving engineering tasks by including all necessary software packages in one place:
Siemens SIMATIC S7-1200 CONTROLLERS with input/output cards:
Each training participant has at their disposal an individual training station designed to learn industrial tasks and solutions based on the use of the Siemens S7-1200 controller. The training station consists of a controller equipped with digital and analog input/output modules, connected to a simulator of digital and analog input and output signals.
- working memory 150KB
- 14 digital inputs (6 can work as high-speed counters)
- 10 digital outputs (4 fast, 100kHz)
- 2 analog inputs
- integrated ETHERNET - PROFINET
- each controller has an attached SB1232 module - containing an analog output with a resolution of 12 bits
Additionally, the controller is equipped with a setting unit containing:
- 8 buttons for input signals
- potentiometer adjusting the voltage range of the analog input
- analog input voltage value display
- analog output voltage value display
Software
SIEMENS TIA Portal V17 is the next version of the integrated design environment that supports solving engineering tasks by including all necessary software packages in one place:- STEP7 for PLC programming,
- WinCC for creating visualizations for HMI operator panels and SCADA systems,
- STEP7 Safety for preparing a safety program,
- Startdrive for operating SINAMICS series drive units,
- And many others, such as SiVArc or TestSuite.
- Ladder Diagram (LAD)
- Function Block Diagram (FBD)
- Programming Sequence Control (GRAPH)
- Structured Control Language (SCL)
- Statement List (STL)
- Cause Effect Matrix (CEM)
- Continuous Function Chart (CFC)
About us
Catering
In addition to the substantive aspect, the comfort of our training participants is very important to us. We provide students with a climatic cafe and restaurant space, which is a place for refreshments and relaxation during breaks. We invite you to use the coffee bar and the modern massage chair!
During each training day, participants receive:
During each training day, participants receive:
- Unlimited access to the Cechownia Cafe coffee bar, serving tea and high-quality freshly ground coffee. The bar is equipped with:
- NECTO Karisma - a professional espresso machine of Italian production.
- THERMOPLAN BW 4 - a professional espresso machine made in Switzerland.
- Two-course dinner - a combination of traditional, home-made flavors with meals served in restaurants.
Catalogues
